Search

FAQ

• Why does Pro-finder respond to status queries, but does not communicate any alarms from the connected WiPro?

  If the connection cable between the devices was plugged in on both sides (i.e. mechanical cause can be ruled out) and the WiPro status (‘WiPro off/on’) actually appears in the first line in the status reports, then presumably the wrong prepaid query code was used or, if a contract card is used, a query code was entered. Then the Pro-finder is stuck in a loop in an alarm situation, of all times, until it receives a negative response from the provider.
  Please correct the programming! Feel free to use the Thitronik app for this.

FAQ

• For which vehicle types is the WiPro easy suitable?

  The WiPro easy is the ideal alarm system for caravan, motor home and van owners, as it can be installed in any base vehicle, regardless of manufacturer or age. The only requirement is a connection to a 12 V DC power source. For caravans and vans, it is recommended to use an additional body battery to operate the alarm system separately from the vehicle's power circuit.

FAQ

• Does the Pro-finder work without WiPro and which functions can I then use?

  Pro-finder can naturally also be used without a WiPro:
  Thanks to the integrated GPS receiver, you can use the locating function. Geofencing is likewise possible (can be activated via text message or voltage input). As are the voltage measurement inputs and the switching outputs for up to 2 electrical consumers. Output A also for disconnect or kill function (ignition interruption via external relay).

  You communicate via text message with your Pro-finder or the Pro-finder with you. Ideally with our Thitronik app.

News

Product news at Thitronik

WiPro III safe.lock for Ford Transit and NFC module available now

FAQ Overview

Questions about WiPro „all in one“

FAQ Overview

Questions about WiPro

FAQ

• Which software version does my WiPro ‘all in one’ have/need?

  Version	Time period	Function
  Version 3.7	To 12/2010	Support of all Euro 4 models
  Version 4.4	01/2011 – 06/2011	easy add function, turn signal actuation
  Version 4.7	since 06/2011	Support of Euro 5 (Ducato)
  Version 6.3	since 01/2012	Support of New Renault Master, VW T5 Facelift

  The constant further development of the WiPro ‘all in one’ has already brought several software releases on to the market. The respectively added functions are shown in the column on the right.

FAQ Overview

Questions about WiPro III

FAQ Overview

Questions about WiPro easy

FAQ

• Can I still extend my WiPro? And what does easy-add mean?

  Need to secure another roof vent or service hatch?

  A radio cable loop for the new e-bikes?

  The WiPro III is a modular system that permits later addition of components at any time.
  Thus, you can easily react to changes in the vehicle conditions or your personal safety requirements.

  Version 2.0 of the easy-add function enables teach-in of wireless accessories on the central control unit either with a wireless remote control or the driver-side door (CAN):

  • Disconnect the power to the WiPro III central control unit for about 10 seconds.
  • Reconnect the power and either press the large button / loudspeaker button on the wireless remote control 868 5 times or open and close the driver-side door 5 times within 30 seconds.
  • WiPro acknowledges this with a beep and the status LED in the dashboard lights up continuously in red – the alarm system is now ready for teach-in of a new wireless accessory. Now trigger the wireless accessory by opening/closing. From the central control unit, 2 different signal tones sound as acknowledgement.
  • Disconnect the power again and reconnect. – That’s it.                                                                                                                                            

  In combination with the Pro-finder (software-dependent), the teach-in operation can also be started via a text message command (easy add 3.0) without interrupting the power supply. Please use the Thitronik app for this.